GMK Tilting Disc Check Valve

The term “tilting disc check valve” refers to a specific type of check valve. In a plumbing system, check valves are used to stop the flow in the opposite direction. In a pipeline system, the flow of the material operates these valves. The valve opens when the fluid pressure in the system is high enough, and it closes when the flow direction changes. The check mechanism’s own weight, back pressure, a spring, or a combination of these forces bring the lid down. Swing, tilting disk, piston, butterfly, and stop are the common varieties of check valves. The swing check valve and the tilting disc check valve are quite similar in design. The straight-through design of the tilting disc type, like that of the swing check, reduces fluid resistance and turbulence. In both horizontal and vertical lines with the upward flow, tilting disc check valves can be installed. In bigger diameter valves, some designs can be installed by merely fitting between two flange faces, making for a lightweight, space-saving setup.

  • Size:2″-36″
  • Rating:150LB, 300LB, 600LB, 900LB, 1500LB
  • Material:WCB, LCB, LCC, WC6, WC9, C5, C12, C12A, CF8, CF8M, CF3, CF3M, CN7M, Alloy 20, B148, UB6, Hastelloy C etc
  • Connection:Flanges, RTJ flange, butt weld
tilting-disc-check-valve-01
left
right
tilting-disc-check-valve-01

CE Certification

ISO Standards

Warranty Included

DESCRIPTION

Benefits:

  • The valve body, guiding fluid, disc with axial movement, and spring components make up a Tilting Disc Check Valve. The medium cannot leak backward because of this product. The pipes must be checked for safety.
  • For better fluid performance and reduced flow resistance and pressure, the valve body, disc, and tail vertebra are all built as streamlined channels.
  • Third, the high-performance spring materials used in the Tilting Disc Check Valve have outstanding corrosion resistance, oxidation resistance, and mechanical qualities, guaranteeing the springs’ durability and reliability throughout time.
  • Fourth, it operates quietly, preventing damage to equipment and pipes from water hammers and other noises that can occur when a valve is opened and closed.
  • The disc of the valve opens and closes rapidly in reaction to shifts in fluid pressure, and this is made possible by the valve’s extremely dependable pre-compression spring.

Feature

  • Tilting disc check valves produce slightly more pressure drop than swing check valves of the same size. These check valves have a single-piece disc without a hinge. In response to flow forces, the disc pivots about hinge pins that are located within the geometry of the disc and slightly above the center-line of the valve body. Due to the disc rotating onto the seat, the sealing surfaces must be conical. Some tilting disc check valves include a counterweight on the disc, dramatically increasing the disc stability with lower flow rates.
  • Tilting disc check valves were designed specifically to minimize the potential for high-energy water hammers. This objective is accomplished by locating the disc center of rotation a short distance from its pivot point, thus allowing the disc to quickly close with flow stoppage or flow reversal. Although it is best to size this valve to be fully open, the disc is reasonably stable under some less than full-open flow conditions.
  • When it comes to maintenance, tilting disc check valves are more challenging than swing check valves. To keep seat leakage to a minimum, the conical seating surfaces of the disc and in-body seat must mate well, and the disc pivot location must be precise.

 

tilting-disc-check-valve-02

 

TECHNICAL SPECS
Size 2″-36″
Rating 150LB, 300LB, 600LB, 900LB, 1500LB, 2500LB
Material WCB, LCB, LCC, WC6, WC9, C5, C12, C12A, CF8, CF8M, CF3, CF3M, CN7M, Alloy 20, B148, UB6, Hastelloy C etc
Connection Flanges, RTJ flange, butt weld
Supply ability 10000 piece/pieces per month
Port Wenzhou/shanghai
Payment terms L/C, D/A, D/P, T/T
Delivery time 7-10 Working day
Standard
  • Design and manufacture: API6D, ANSIB16.34
  • Pressure-temperature rating: ASME B16.34
  • Face to face(end to end): API6D, API594
  • End connection: 2″-24″ ASME B16.5; 26″ -42″ ASME B16.47; B.W end ASME B16.25
  • Test and inspection: API598, API6D
Q&A
Can we order goods from you directly?
Yes, we look forward to receiving your order. However, please note our minimum purchase quantity. If you require smaller quantities we will be happy to arrange an individual delivery. We would be delighted to assist you.
Can I get a discount?
This depends on the specific situation, you can call directly to consult.