Pressure Seal Check Valve

GMK Pressure Seal Check Valve is a selection of valves that have been developed in accordance with ASME standard B16.34. It Can be purchased in Swing Check, Piston Check, and Tilting Disc varieties (Y and T pattern design). It was developed to always provide the highest possible level of flow efficiency and safety. The dimensions are from end to end by ASME B16.10. Swing check valves and tilting disc check valves are both suitable for installation on horizontal as well as vertical (upflow) pipes. Stop check valves, also known as Y and T designs, were developed specifically for use on horizontal pipework.

  • Size:2″-30″
  • Pressure:900LB,1500LB,2500LB
  • Material:WCB, LCB,LCC, WC6,WC9, C5,C12,C12A, CF8, CF8M, CF3, CF3M, CN7M,Alloy 20,B148,UB6 ,Hastelloy C etc
  • Connection:Flanges,RTJ Flange,Butt Weld,Hub end,Groove
pressure-seal-check-valve
left
right
pressure-seal-check-valve

CE Certification

ISO Standards

Warranty Included

DESCRIPTION

GMK tilting disc check valves are built with triple offset seat geometry to prevent the disc from slamming, maintain stable disc operation, and ensure speedy closure service at the same time. This is done to prevent the disc from slamming. Since the tilting disc seat is produced directly in the body, the elimination of seat/body welding helps to prevent the face of the seat from becoming misshapen.

Benefits

  • The potential of pin seal leakage is removed, and in-line maintenance is made possible since the hinge pin is not exposed to the outside.
  • All of the mobile components of the cage are linked to the carrier and may be removed quickly and simply for maintenance.
  • To provide optimal erosion resistance and extended service life, the forged seat/disc is made of CoCr alloy that has been honed and lapped to a mirror finish. It’s a sealed weld to the main structure.
  • To ensure a secure shutdown, the disc may revolve inwards to a certain degree. It comes to a standstill when opened all the way.
  • Hinge pin bearings made of CoCr alloy.
  • Simple counter service. It’s simple to get to all the component components for servicing. Seat fronts are remappable.
  • Hat with a forged crown.

 

Product Name: Pressure Seal Check Valve

  • Size:2″-30″
  • Pressure: 900LB,1500LB,2500LB
  • Material: WCB,LCB,LCC,WC6,WC9,C5,C12,C12A,CF8,CF8M,CF3,CF3M,CN7M, B148, ect
  • Connection: Flanges,RTJ Flange,Butt Weld,Hub end,Groove

Feature

  • Pressure seal cap
  • Swing Type, Anti-rotation Disc
  • Renewable Seat Ring
  • Non-penetrate disc shaft
  • Horizontal servece
  • Back up ring: Absorbs thrust applied by internal pressure
  • Thrust ring: Protects the soft metallic gasket from deformation
  • Gasket Unique angular design provides superior sealing.
  • NACE MR-01-75
TECHNICAL SPECS
Size 2″-30″
Pressure 900LB,1500LB,2500LB
Material WCB, LCB,LCC, WC6,WC9, C5,C12,C12A, CF8, CF8M, CF3, CF3M, CN7M,Alloy 20,B148,UB6 ,Hastelloy C etc
Connection Flanges,RTJ Flange,Butt Weld,Hub end,Groove
Supply Ability 10000 Piece/Pieces per Month
Port Wenzhou/shanghai
Payment Terms L/C,D/A,D/P,T/T
Standard
  • Design and Manufacture:API6D,BS1868,ANSIB16.34
  • Pressure-temperature rating: ASME B16.34
  • Face to face(end to end):ANSIB16.10,API6D
  • End Connection: 2″-24″ ASME B16.5; 26″ -42″ ASME B16.47; B.W end ASME B16.25
  • Test and inspection:API598,API6D
Q&A
Can we order goods from you directly?
Yes, we look forward to receiving your order. However, please note our minimum purchase quantity. If you require smaller quantities we will be happy to arrange an individual delivery. We would be delighted to assist you.
Can I get a discount?
This depends on the specific situation, you can call directly to consult.