Cryogenic Ball Valve

Cryogenic ball valves may be used as high-efficiency shutdown valves at temperatures as low as -425 degrees Fahrenheit. These valves can also be employed in both intermittent and continuous flow scenarios. Cryogens such as oxygen, hydrogen, methane, ammonia, nitrogen, fluorine, liquefied natural gas (LNG), and deuterium are unrivaled in terms of their durability; as a result, they are used in the applications that place the greatest amount of strain on materials.

  • Size:1/2″-24″
  • Pressure:150LB,300LB,600LB,900LB
  • Material:WCB, LCB,LCC, WC6,WC9, C5,C12,C12A, CF8, CF8M, CF3, CF3M, CN7M,Alloy 20,B148,UB6 904l,Hastelloy C etc
  • Connection:Flanges or NPT thread end.
  • Operate:Hand lever, Gearbox, Penumatic Actuator
cryogenic-ball-valve
left
right
cryogenic-ball-valve

CE Certification

ISO Standards

Warranty Included

DESCRIPTION

Cryogenic ball valves are ball valves that have been modified to have special properties so that they may be used at very low temperatures. The one-piece, strong stem of the cryogenic design is held together at its core by a Polyfill thrust bearing and a split ring made of stainless steel. As a direct consequence of this, it is not only risk-free to use but also generates far less friction while in use. Insulation is provided in a uniform manner using polyfill cushions. The use of an orientable stem/ball connection in conjunction with an upstream hole in the ball is what ultimately leads to the achievement of positivity.

Benefits

  • Positive ball cavity relief, which consists of a relief hole bored upstream from the ball, is one method that protects against overpressure brought on by thermal expansion. 
  • On all extended stem valves with a diameter of 2 inches or bigger, the ball will always be in the right position since the stem is a single piece and includes an alignment pin.
  • When a one-piece or two-piece design is inserted inside the body, the Pressure Protected Stem from Polyfill uses thrust washers to prevent the stems from blowing out.
  • Even in the most demanding and high-cycle settings, the leak-free functioning that is guaranteed and stem-centering followers is not at all compromised.

 

Feature

  • Two pieces design
  • Floating ball or Trunnion mounted ball.
  • Temperature serving:-196 C degree
  • Length of extended bonnet/stem according to shell standard or upon request
  • SFire safe design,Anti-static device
  • Anti-blow out stem
TECHNICAL SPECS
Size 1/2″-24″
Pressure 150LB,300LB,600LB,900LB
Material WCB, LCB,LCC, WC6,WC9, C5,C12,C12A, CF8, CF8M, CF3, CF3M, CN7M,Alloy 20,B148,UB6 904l,Hastelloy C etc
Connection Flanges or NPT thread end.
Operate Hand lever, Gearbox, Penumatic Actuator
Supply Ability 10000 Piece/Pieces per Month
Port Wenzhou/shanghai
Payment Terms L/C,D/A,D/P,T/T
Standard
  • Design and Manufacture: API6D, BS5351,ASME B16.34,API608,MSS-SP-72
  • Pressure-temperature rating: ASME B16.34
  • Face to face(end to end):ANSIB16.10,API6D
  • End Connection: 2″-24″ ASME B16.5; 26″ -42″ ASME B16.47; B.W end ASME B16.25
  • Test and inspection: API598,API6D,BS5146
  • Fire safe design: API607,API6FA
Q&A
Can we order goods from you directly?
Yes, we look forward to receiving your order. However, please note our minimum purchase quantity. If you require smaller quantities we will be happy to arrange an individual delivery. We would be delighted to assist you.
Can I get a discount?
This depends on the specific situation, you can call directly to consult.